The KONFORT 700 range includes 12 models with different specifications and operating modes, for servicing vehicle air conditioning systems containing R1234yf, R134a or R744 (CO2).

The KONFORT 700 range is divided in KONFORT TOUCH and KONFORT, based on the display the station is equipped with.
The display can be a touchscreen type, allowing simple and quick interaction with the station, or a standard type that requires using the practical button panel.

Bi-Gas solutions

KONFORT 780 TOUCH is able to work with R134a and R1234yf refrigerants at the same time. In fact, it is equipped with two separate tanks and circuits so that, within a matter of minutes, you can switch between servicing vehicles with A/C systems filled with different refrigerants.

R134a or R1234yf Refrigerant

TEXA’s 707 TOUCH, 712 TOUCH, 720 TOUCH, 760 TOUCH and 760 BUS TOUCH recharge stations can be configured to work either with the older R134a or with the new R1234yf.

You need to specify which refrigerant you plan to work with when you purchase the station, but retrofit kits are available to switch refrigerant at a later date.

R1234yf Refrigerant

KONFORT 770S TOUCH it’s especially designed for the new refrigerant gas R1234yf.

It was built in compliance with the strict specifications required by German manufacturers and it’s equipped with the refrigerant identifier kit as a standard.

R134a Refrigerant

TEXA still offers three recharge stations, the KONFORT 705R, 705R OFF ROAD and the 710 TOUCH, exclusively for use with the older R134a refrigerant, which is still found in most vehicles on the road today. These stations offer the same excellent design and build as the top models in the KONFORT range but are simpler in a number of details.

R744 (CO2) Refrigerant

The KONFORT 744 recharge station was developed in collaboration with leading German car makers and is one of the very few solutions currently available that were specially designed to service and recharge the latest air conditioning systems for R744 refrigerant (C02).

KONFORT 700 SERIES APPROVED BY:

AUDI – BENTLEY – BMW – BUGATTI – CHEVROLET – HYUNDAI – JAGUAR – KIA – LAMBORGHINI – LAND ROVER – MAZDA – MERCEDES-BENZ – MINI – MITSUBISHI – NISSAN – OPEL – PORSCHE – RENAULT – SEAT – SKODA – SUBARU – SUZUKI – TOYOTA – VOLKSWAGEN *
 

* Please check at your TEXA dealer which model and which refrigerant type is recommended by the manufacturers listed above.

The portable refrigerant gas identifier

Identify the type of refrigerant in the vehicle or in the tank for recharging, and check its pureness.

FORMING GAS

TEXA’s SOLUTIONS FOR DETECTING LEAKS IN A/C SYSTEMS

The Forming Gas Kit is composed of three elements:

Forming Gas Cart TTF 700

The Forming Gas cart TTF 700 offers a complete and independent solution for leak detection. It is equipped with all the necessary tools to operate on A/C systems that use any type of refrigerant.

Forming Gas case

The Forming Gas case, included in the purchase of the Forming Gas cart TTF 700 as part of its instrumentation, it can also be purchased separately to support the KONFORT A/C recharge stations (760R, 760R BUS, 770S, 780R and 744) in the leak detection.

H2 Detect Sniffer

The H2 Detect Sniffer detects any hydrogen in the air with precision, allowing you to detect the leak location.

Forming Gas Cart TTF 700

– Dimensions: 1180x590x668 mm; Weight: 24.5 kg
– Suitable for A/C systems: R134a, R1234yf, R744
– Forming Gas tanks* supported up to 20 L
– Maximum pressure: 20 bar for R134a and R1234yf; 100 bar for R744
– Equipped with safety valve that opens completely in case the operating value is  reached
– Manometer 100 bar, 100 mm CL1
– Service hoses: R134a (LP/HP) 3 m; R1234yf (LP/HP) 2.5 m; R744 (LP/HP) 2.5 m; Forming Gas tank 2.5 m
– Forming Gas tank pressure reducer: input operating pressure max 300 bar; output pressure max 100 bar
– Safety belt to secure the tank to the cart
– Forming Gas case (can also be sold separately)

* Forming Gas tank not included

Forming Gas case

The Forming Gas case, included in the purchase of the Forming Gas cart TTF 700 as part of its instrumentation, it can also be purchased separately to support the KONFORT A/C recharge stations (760R, 760R BUS, 770S, 780R and 744) in the leak detection.

– Dimensions: 470x350x190 mm; Weight: 7 kg
– Set of adapters for the coupling of the Forming Gas tank
– Forming Gas tank pressure reducer: input operating pressure 300 bar max, output 100 bar max
– Connection kit for KONFORT 744 including: Forming Gas quick coupler, 2500-mm flexible hose for high pressure connection
– Connection kit for KONFORT 760R, 760R BUS, 770S and 780R including: 150 mm hose, evacuation valve, safety valve
– Teflon seals

H2 Detect

– H2 measurement spectrum: from 0 to 2000 ppm
– Response threshold: the hydrogen concentration is measured in increases of 1 ppm
– Reaction time: 14 s
– The measuring sensor is positioned at the end of a flexible extension that is 200 mm in length.
– The tool also provides a visual and acoustic feedback about the hydrogen concentration
– Power supply: 2 x 1.5 V Mignon /AA
– Battery life: approx. 6 h (typical)
– Operating conditions: from -10 to 40 °C /from 14 to 104 °F
– Weight: approx. 200 g (battery included)
– EC directives: 94/9/EC (ATEX), 2014/30/EU

REC+

REC+ is TEXA’s new, patented solution for recovering contaminated refrigerants from vehicle air conditioning systems.

The device works with the fully automatic recharge stations in the KONFORT range (780 TOUCH, 760 TOUCH, 760 BUS TOUCH, 720 TOUCH, 707R, 760R, 760R BUS and 780R BI-GAS) and guarantees the completely safe recovery of all kinds of refrigerant. REC+ can easily be moved around the workshop, satisfies the technical, performance and safety requirements of leading car makersand permits the recovery of up to 95% of the refrigerant contained in the system. An automatic procedure integrated in the software of KONFORT recharge stations lets you complete all necessary operations easily. At the end of the recovery procedure, you can discharge contaminated refrigerant into a tank for subsequent disposal.

Prodotto da inserire all’interno del sistema per il trattamento dei gas di climatizzazione di autoveicoli KONFORT.
Verificare con il proprio rivenditore TEXA di fiducia le modalità di accesso al Nuovo Piano Industria 4.0.

DEPLIANT