eTRUCK
eTRUCK is a miniaturised tool that, once installed in the vehicle’s diagnostic socket* and configured in a few minutes, offers a brand new type of service.
In fact, the workshop can constantly monitor the vehicle status remotely, manage its maintenance from a predictive point of view and, absolute new feature, perform adjustment functions that allow restoring the vehicle’s optimal working condition.
It can be used in trucks, agricultural and construction vehicles. It acts as a conjunction element between the repairer and the vehicle, helping increase customer loyalty thanks to a dedicated continuous assistance service.
eTRUCK is the ideal solution also for drivers and fleet managers, as it keeps them constantly updated on the conditions of their vehicles and allows them to carry out actions aimed at reducing costs and optimising the use of vehicles, thanks to a dedicated app and management portal.
Check the complete and always up-to-date eTRUCK coverage:
Advantages for TEXA workshops
Through the Workshop Portal, there is the possibility to increase customer loyalty thanks to a highly professional service, which allows them to:
- Constantly monitor the status of the vehicles remotely and to intervene on the electronic systems as if they were in the workshop.
- Manage the ordinary and extraordinary maintenance in advance.
- Share an appointment planner for the
maintenance with the driver and the fleet manager. - Manage the customer portfolio with a single software program.
- Create a detailed customer profile.
Advantages for the drivers
Thanks to an APP* that supplies very useful information while driving the vehicle, it is possible to:
- Read the Tachograph data in real time.
- Monitor your driving style.
- Fill out a Driver’s Daily Vehicle Check & Defect Report list as required by the regulations of certain countries.
- Read the vehicle data in real time.
- Have a remote vehicle diagnosis available that helps solving any fault quickly, avoiding having to go to the workshop.
- Consult the service calendar shared with the workshop.
* For Android and iOS
Advantages for the fleet manager
Through the Fleet Manager Portal, can:
- Check the entire fleet regarding the status of the vehicles at a maintenance level.
- Assist remotely, through the diagnosis and the solution of possible vehicle faults by the workshop, reducing costs and increasing efficiency.
- Monitor the status of the maintenance of the vehicles and their expirations.
- Share an appointment planner for the maintenance with the workshop.
- Detect each driver’s driving style.
- Download the Tachograph data remotely.
- SDownload remotely, directly from the ECU, the Trip Data Recorder, allowing detailed
analyses of the use of the vehicle.
If you haven’t found the answers you were looking for,
contact us for further information on the operation and/or management of your eTRUCK.
Video Tutorial eTRUCK
Technical Specifications
MODEL
TEXA eTRUCK
PROCESSOR
ARM Cortex M4 (STM32F439ZIY6)
MEMORY
SDRAM 8 MB; Flash NAND 4 GB
COMMUNICATION
Bluetooth Classic (2.1); Bluetooth 4.0 Low Energy (Smart Ready)
DIAGNOSTIC CONNECTOR
Presa OBD ISO15031-03 per sistemi a 24 V
SUPPORTED AUTOMOTIVE BUS TYPE
- 4 HS CAN transceivers connected to OBD pins 3-11,
1-9, 12-13, 6-14 that can be enabled individually; - 1 J1708 transceiver connected to pins 12-13; 1 ISO9141-2, ISO14230 transceiver with 60mA current protection connected to pins 3 or 7
VISUAL WARNINGS
1 green/red bi-coloured LED; 1 blue LED
INERTIAL SENSOR
Accelerometer: 3 axis, ± 16 G F.S.; Gyroscope: 3 axis, ± 2000 DPS G F.S.
SUPPLY VOLTAGE
12 / 24 Vdc
CONSUMPTION
Standby < 6 mA
Normal mode: 60 / 120 mA (12 / 24 Vdc)
DEVICE ACTIVATION
Possible from OBD pins 1 and 8 or by monitoring the battery voltage
OPERATING TEMPERATURE
– 20 °C ÷ 70 °C
STORAGE TEMPERATURE
– 40 °C ÷ 85 °C
ISM OPERATING FREQUENCY BAND
2400 – 2483.5 MHz
MAXIMUM TRANSMIT POWER IN FREQUENCY BAND
4 dBm
RELATIVE HUMIDITY
10% ÷ 80% without condensation
DIMENSIONS [mm]
47,8*23,4*24,4
WEIGHT
15 g
DIRECTIVES
RED 2014 / 53 / EU; ROHS 2011 / 65 / EU
PRODUCT STANDARDS
• EN 301 489-1 V2.1.1;
• EN 301 489-17 3.1.1;
• EN 300 328 V2.1.1;
• EN 62479:2010;
• EN 60950-1:2006 / A11+A1+A12+AC:2001+A2:2013;
• ISO 7637-1:2002; ISO 7637-2:2011
REGULATIONS
ECE / ONU R10
